Write a Review

- Made from recycled water bottles in North Carolina, USA - Content: 55% Recycled Polyester, 45% Lycra/Nylon - Care: Machine wash cool. Tumble dry low. No bleach, softeners, or harsh detergents. Maximum thigh circumference of 25 in (63.5 cm) The form-fitting Kneeker is designed to protect and warm the knee and quadricep when riding, covering from mid-thigh to overlap with the sock. Also available in the original knee length. How to wear the Kneeker: bunch up the Kneeker and use both hands to pull it up to the knee. Then pull the top up to overlap with bib shorts, pulling the bib shorts over the Kneeker at the top of the thigh. For the full length Kneeker, pull the bottom down to overlap with socks. If the Kneeker is sliding down, it means there's north south tension pulling from the bottom of the Kneeker; the Kneeker should only have east west tension. This will keep it from pulling down. The overlap of the bib shorts holds the Kneeker in place. 55% Recycled Polyester, 45% Lycra/Nylon

Designed in conjunction with Matt Jones, the S2 DJ features unique rubber anti-slide grip points on the nose and a pivotal stealth fitment - Subtle design with hard-wearing polyurethane fabric top - 234x132mm, 290g

The R-Hawk checks all the standard boxes for an all-mountain/enduro crank. Like ROTOR’s REX cranks, the R-Hawk is a work of engineering built on the principles of lightweight and rigid, but R-Hawk’s modular concept offers compatibility that meets – and even exceeds – current trends in mountain bike technology. Crank arms will be available independent of an axle and chainrings; there’s no longer a factory-assembled arm+axle, and both crank arms can be removed from the axle. This way the R-Hawk can be mounted to standard, boost, and downhill axles. - Lightweight, modular 6082 aluminum arms with exceptional stiffness-to-weight ratio, with the ability to handle the demands of enduro and DH - OCP direct mount rings allow the rider to configure to their optimum chainring position for maximum power transfer - Axle spindle, spacer, DM ring, and bottom bracket options are available separately - Due to the inset bore location of the pedal threading, some flat pedals with a large inboard bearing may not be compatible with the crankset or crank boots

The new Tarmac is designed to go fast, there’s no if’s, and’s, or but’s about that—but it represents so much more than just aerodynamic prowess. With a lightweight, Rider-First Engineered™ frame, it delivers the best-possible ride characteristics, no matter the size. So no matter what you have planned for your new Tarmac, its ready to help you achieve your goals—PRs, KOMs, or podium top-steps. One bike to rule them all. With a full SRAM Rival Etap AXS electronic groupset to keep shifts crisp and fast, and S-Works Turbo 700x26mm tires to keep you rolling fast, this new Tarmac delivers performance at a more palatable price point. - 'Aero is everything'—we’ve been preaching it for years and it’s still the driving force for the new Tarmac. In our quest for tube shapes that deliver the fastest frame that the UCI rules allow, we took a page out of the Venge development book and utilized our FreeFoil Shape Library. Armed with a library of optimized shapes, we turned to the Win Tunnel to plug these shapes into a modular test bike, for more testing and validation. The result? A new Tarmac Expert that’s faster than before—33 seconds faster over 40km than the Tarmac SL6. No compromises, just pure speed. - While aerodynamics were paramount to the Tarmac’s development, and to the development of all of our race bikes, weight was the co-pilot on this optimal race bike journey. Previously “aero bikes” always compromised in the weight department—the more drag you reduced, the more weight you gained. With the new Tarmac, our design philosophy was to keep it at, or below, the UCI weight limit out of the box, with no sacrifices to aerodynamics. And with the help of the FreeFoil Shape Library, tools like isotopic FEA analysis, and some engineering wizardry by the best engineers in the industry, we delivered a frame that weighs a mere 920 grams, without giving up a gram of aero, stiffness or ride quality. - Continuing our quest to develop the perfect race bike, we used our Rider-First Engineered™ philosophy to ensure that the new Tarmac is the most balanced, best handling Tarmac yet—no matter the size. With an army of the world’s best test riders from our three World Tour Teams — Boels-Dolmans, Deceuninck-Quick-Step, and Bora-hansgrohe — we made changes to the Tarmac based on their thousands of kilometers on the road. We balanced the ride quality between the front and rear end, so even the longest days in the saddle continue to be comfortable—all without giving up anything to the Tarmac’s legendary handling and race-winning snappiness. - Building on the learnings from the Venge, the new Tarmac utilizes simple integration to create a clean, fast cockpit that’s easy to live with. We’ve improved the routing for any configuration — mechanical shifting, traditional stems, round bars, etc. — all while keeping its aerodynamic attributes. These same traits also make the new Tarmac easy to work on and easy to travel with. It’s a win-win.

RockShox, 11.4118.038.001, Service kit, Monarch XX B1 2014+

Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Lightweight and strong 6061-T6 aluminum alloy construction - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 353g - Note: Salt Flat bars are not compatible with bar ends

The All Condition Armadillo continues to be the leading tire for anyone who needs top performance blended with puncture-resistance. This workhorse tire is impressively robust for touring and commuting, as well as being tough enough to navigate the roughest road conditions. - Casing: 60 TPI - Bead: Wire - Compound: 60a - Flat Protection: Armadillo - 700 x 23mm, PSI 110-125, approximate weight 360g - 700 x 25mm, PSI 110-125, approximate weight 395g - 700 x 28mm, PSI 85-95, approximate weight 440g - 700 x 30mm, PSI 85-95, approximate weight 480g - 700 x 32mm, PSI 85-95, approximate weight 510g

Shimanno Deore XT RD-M786-SGS Rear Derailleur Outer Cage Plate - "B" fit for SLX RD-M675-SGS, Deore RD-M615-SGS - OEM outer cage plate for XT RD-M786-SGS

Our Primaloft Lightweight socks utilize Primaloft polyester yarn to keep your feet warm in a variety of temperatures, all without overheating or being excessively bulky. - Calf High—18cm/7in with seamless toe construction. - Great for transitional weather and offers great moisture-wicking and thermal regulation. - Primaloft polyester yarn offers the best thermal performance to weight in a wide temperature range. - Soft terry-loop footbed and toe provide comfort and warmth for transition weather. - Made in Italy.

Spiral butted tubing technology is game changing tube extrusion that is more durable, stronger and less weight - 7075 heat treated spiral butted aluminum - Updated graphics and an additional 50mm rise option

Rep your favorite national park with the VISION Six Impression National Park collection. Created in partnership with our local friends at Anderson Design Group, these beautiful socks pay homage to the majestic locations we love to explore. Featuring designs from Yellowstone, Zion, Great Smoky Mountains, Yosemite, and in celebration of its 100th anniversary, Grand Canyon. Each sock is made with high-performance fibers that wick moisture to keep your feet dry, cool and blister-free, and feature 360° prints of these National Parks. We are proud to support the work of the National Park Foundation, the official charity of America’s national parks. The SIX (Crew) cuff hits at mid-calf. - Six-inch crew cuff features 360° printed designs, combining performance and style that protects your calf and leaves a lasting impression. - High-performance fibers, crafted for breathability, keep your feet dry, cool, and blister-free. - Medium cushion provides all-day comfort while contoured fit gently hugs and supports feet while keeping socks in place. - 75% Nylon / 21% Polyester / 4% Spandex - Made in USA

Premium features, certified protection, and sleek styling make the Chamonix a tremendous value for any cyclist. You'll also find that it's equipped with next-level protection courtesy of revolutionary MIPS technology (Multi-Directional Impact Protection System). - One-size system, designed for an easy and accurate fit to a wide range of head sizes - Headset SX fit system with micro-adjustable dial for an easy, secure, and accurate fit - 4th Dimension Cooling System optimizes ventilation - In-molded shell improves strength and reduces weight - Tri-Fix web splitter for improved comfort and ease of strap adjustments - Reflective webbing and decals for increased visibility to motorists in low-light conditions - Patented clip-on visor included - MIPS-equipped - Fit system is ANGi crash sensor ready

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Non-Boost 6mm offset

- Branded screen print on the chest. - Fabric Content: 85% drirelease® Polyester, 15% Elastane

This sleeved, 25mm-wide, light and strong rim is as versatile as AM riding itself. Derived from our extremely successful Enduro rims, which have won at the world's highest level under the world's fastest racers, the M 462 packs that world-class technology into a slightly slimmed package for All Mountain use while staying affordable thanks to the sleeved rim joint.

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Emonda ALR frameset is a race-ready, top-tier alloy frame that's intensely light, fast, and far more pocket-friendly than carbon frames of its caliber. This lightweight frame is built with top-tier road racing H1.5 geometry, with an integrated cockpit and Kammtail tube shapes for aerodynamic advantage. It's right for you if... You're building up a disc road bike for club rides or races, and you want an advanced aluminum frame with the sleek looks and handling characteristics normally found only in carbon models. The tech you get An ultralight 300 Series Alpha Aluminum frame with aerodynamic Kammtail shaped tubes, Invisible Weld Technology for seamless joints, and internal cable routing. Includes an Emonda SL carbon fork with a carbon steerer and a headset. Built for flat-mount disc brakes. The final word Carbon looks and ride quality, aluminum price point. If you thought alloy couldn't contend with carbon in beauty and performance, think again. Emonda ALR Disc frameset is a value-minded ride that's perfectly comfortable taking a far more expensive carbon bike to the line. Why you'll love it: - This ultralight alloy frame is designed for racing and packs in super tidy cable routing - It climbs fast, corners hard, and descends with confidence - Kammtail tube shapes help make Émonda ALR even faster than before - It shares the geometry of our highest-end carbon Emonda race bikes, and it gives you a ride quality that stands up in every way to far more expensive carbon bikes - Internal cable routing extends the life of your cables and adds to the bike's sleek look Features: Lightest in its class Emonda ALR was built with our best and lightest 300 Series Alpha Aluminum and a gram-trimming design to keep things light, fast, and fun. Race-ready geometry An optimized H1.5 race geometry, developed in collaboration with Trek-Segafredo, puts you in the right position for power. Refined integration Integrated cable routing cleans up the cockpit and makes Emonda ALR even faster in the wind. Faster than ever Emonda ALR's new Kammtail aero tube shaping keeps things light and fast wherever you ride – whether you're powering up climbs or racing across flats.

Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit. Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders. - 210mm Dropper Post - adjustable down to 190mm - 180mm Dropper Post - adjustable down to 160mm - 150mm Dropper Post - adjustable down to 130mm - 120mm Dropper Post - adjustable down to 100mm

Checkpoint SL 5 is a carbon gravel bike made for epic all-road adventures. It's built with lightweight OCLV Carbon, terrain-smoothing damped IsoSpeed, nimble-yet-stable progressive geometry, internal storage and loads of mounts. All of that adds up to a rad gravel bike capable of crushing the longest, roughest rides and the most ambitious bikepacking trips. It's right for you if... Chamois or cut-off shorts, bikepacking trip or brutal day of gravel racing—you're going to ride far, go fast, and have a great time. You want a bike that's both fast and comfortable, and you want endless carry options for gravel races and everyday adventures. The tech you get A 500 Series OCLV Carbon frame with damped Rear IsoSpeed and carbon armor, a progressive geometry that's stable at speed and efficient when you're grinding up a climb, internal storage, hidden cables that won't interfere with bags, integrated frame bag mounts, and rack and fender mounts. Plus, a carbon fork, a 2x11 Shimano GRX drivetrain with lower gears for grinding up hills or through rough gravel, and wide 700x40c gravel tires for added stability and traction. You can even run a dropper post to get low on long descents. The final word Light, fast, comfortable. Checkpoint SL 5 gives you the unmatched ride quality of an OCLV Carbon frame with IsoSpeed and gravel-specific geometry, plus internal storage and a drivetrain built for rough terrain. Why you'll love it - The damped, controlled rebound of the IsoSpeed decoupler soaks up fatiguing bumps without bouncing you around - All-new progressive geometry is quick and nimble yet keeps you stable and in control on fast, choppy descents - A sleek internal storage compartment gives you a versatile spot to stow tools and gear - Massive tire clearance means you can use tires up to 45c for extra traction and stability in any conditions - Integrated frame bag mounts and rack and fender mounts make it easy to carry gear and water

The Shimano GRX RX400 front derailleur offers lighter front shifting operation and easier setup thanks to the new link construction and integrated cable tensioner. It features a 2.5mm outboard chain line design to allow wider tire clearance for mixed-terrain riding. - Ergonomic power curve - Integrated cable tension adjustment - Natural stroke feeling - Chainline +2.5 mm vs. conventional road FD - Compatible with up to 42 mm tires - More cable routing options - Lighter front shifting - Wider tire clearance - Precise and easy front derailleur adjustment

Replacement ratcheting cradle straps (for 2 bikes). - Replaces ratchet style straps on Thule Apex XT, Thule Helium Pro, Thule Camber, and Thule Range - Contains six ratchet style straps (four cradle straps and two anti-sway)

- 5mm hardened steel links for moderate security lockups - Includes easy-to-install transport bracket - Includes 2 keys - Key Safe Program - Product dimensions: Length 85cm - Product weight: 2.35 lbs

Campagnolo's Record Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm

The ADV Air Short Sleeve Jersey is made with VaporRize™, a unique blend of yarns that move moisture away from the skin to keep you dry and comfortable. With a UPF 50 rating, a front chest zipper pocket, and a cinchable hem, you’ll feel secure and protected while riding through all the wild elements. - Back panel zipper pocket keeps your essentials secure during your ride. - Bottom hem adjustability for secure fit. - Fabric Content: MAIN: 13% Cotton, 5% Spandex, 82% Polyester - OTHER: 94% Nylon, 6% Elastane

The Trail Short Sleeve Rain Anorak is the perfect solution for those humid thunderstorms. Featuring a three-layer waterproof, yet breathable shell, it'll keep you plenty dry no matter what Mother Nature has to say—but with short sleeves, it's perfect for a variety of temperatures. - Fully taped seams prevent water intrusion, keeping you dry and protected for years to come. - Watertight YKK AquaGuard® zippers prevent unwanted water seepage. - An over-the-helmet hood with a rain visor and adjustable drawcord keeps your head protected from the elements. - Fabric Content: 100% Polyester - Half zip front with gusset allows for venting during the hardest rides, while preventing your jacket from flapping around when open. - Short Sleeve styling and design gives you the shoulder coverage you need, without being overly hot. - Relaxed Fit is loose and comfortable, and also provides plenty of room for layering underneath. - Fabric Content: 100% Polyester

- Inspire your confidence with the MICHELIN Power Cup tire for racing and training - Speed and efficiency inspired by MotoGP technology - Light and reliable thanks to the MICHELIN Aramid Shield Technology and 3x120 TPI casing - Efficient handling and stability in both wet and dry conditions thanks to the MICHELIN GUM-X compound

Lightweight tubular stainless steel bottle cage. Stainless steel won't mark plastic bottles like aluminum cages do. - Bolts are not included. - Made in Japan. (The raw version may have imperfections and discoloration from weld heat)

A hand-built road tire with a supple, lightly treaded design that offers uncompromising speed, traction, and confidence. Confidence at speed The cobbles of Paris-Roubaix were the inspiration for the R4 Classics tire. Confident traction and a fast-rolling yet grippy tread give this hand-made road tire uncompromising performance and road feel, and Hard-Case Lite with polyamide synthetic fiber reinforcement adds puncture protection and durability. - Fast rolling road race tire for when traction and confidence matter most - High grip tread and compound performs in wet and dry conditions - Super supple polyamide synthetic fiber reinforcement provides added casing strength - Hard-Case Lite protects against punctures with lightweight, sub-tread material - Super supple 320TPI casing rolls fast with great ride feel - Clincher tire made using the same handmade process as tubulars to maintain suppleness and ride quality

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 395.9 grams

Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1

Air Can Assemblies for repair and maintenance of Rockshox rear shocks.

The Bluegrass Union is the definition of mountain bike gloves. If you are looking for a versatile glove that you can wear easily, on any ride, and in any condition then the Union is made for you. It stands out for its ergonomic fit and the quality of the seams that blend the technical fabrics that it’s made up of. True comfort to ride fast. - Four-way-stretch breathable mesh on the upper construction - Slim-fit neoprene cuff ensures maximum durability and comfort - Silicon wrist gripper keeps gloves secure - Moisture-wicking mesh finger gussets enhance ventilation and sweat evaporation - Soft-touch covered thumbs to clean dirt and sweat from face and eye-wear - Hollow overlay on thumbs maximizes durability and helps to avoid blisters from long rides - Breathable perforated palms improve ventilation and comfort - Silicone print on brake fingertips provides grip control - Capacitive seams keep you connected with your touchscreen devices

Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. - Compatible with 9, 10, 11, and 12 speed - Narrow Wide tooth profiling ensures consistent chain retention - Lockring installed/removed with ISIS BB tool - Stiff 4mm plate thickness to transfer loads without flexing

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Technical Details: - Racer Fit for snug upper - Bounded upper all seamless for comfort to prevent pressure points - Integrated double X-Comfort Zone for a large range of feet width - BOA Li2, a new mechanism that generates higher power with finer resolution - PowerZone Technology for better ankle support and stability - Lace system with 4 independent adjustment zone to maximized comfort during long rides - 100% Carbon sole with Patented Air Chanel for constant airflow to prevent fatigue and numbness - 3D insoles with 3 adjustable arches for a custom fit - 7.9oz / 225g (size 42)

The fully foldable, compact, and easy-to-use hitch-mounted bike rack for all types of bikes. Thule EasyFold XT 2 hitch bike rack is a fully foldable, compact, and easy-to-use hitch-mounted bike rack for a wide range of bikes and e-bikes. Loading heavy bikes is effortless and with the optional loading ramp, it’s even easier. This durable bike rack also gives you full access to the trunk even when bikes are loaded. Fold the bike rack to a compact size and stow it in your trunk, perfect for an impromptu bike adventure. For unusual bike geometries or oversized frames, bring your bike to one of our Thule dealers and test it out. Features: - Easy mounting of bikes through detachable bike arms with lockable - Thule AcuTight torque limiter knobs that “click” when optimal torque is reached - Fully foldable for convenient mounting, handling, and storage - Wheel straps with adjustable pump buckles for fastening wheels. (Optional XXL Wheel Strap kit to fit longer wheelbases and tires up to 4.7") - High load capacity enabling transport of e-bikes and heavy mountain bikes - Easy trunk access even with bikes mounted, thanks to smart foot pedal tilt - Foldable bike loading ramp integrates into the rack for convenient storage (included) - Large distance between wheel holders enabling transport of sturdy bikes with large wheel bases - Ergonomic transport of the bike rack thanks to the integrated carrying handles - Lock your bikes to the bike rack and your bike rack to the receiver (locks included) - Thule Snug-Tite receiver lock virtually eliminates hitch rack movement in the receiver and locks the hitch rack to the vehicle

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve

The Invisa-Lite elbow pads feature a lightweight, minimalist design. - Impact-resistant 3D foams - Breathable lycra - Interior anti-slip silicone band - Double and single needle heavy-duty stitching - Protection Area: Elbow - Pad Type: Foam

The ENVE 65 is a modern speed specialist in every way. Triathletes and road racers seeking PRs in their objectives against the clock will find their efforts rewarded by the ENVE 65. - Application: Road Race, Triathlon, Time-Trial - Internal Rim Width: 21mm - Compatible Tire Size: Tubeless 25c or larger - Wheelset Weight: 1641g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah

When you need comfort and performance at a tremendous value, look no further than our RBX Comp Jersey. - Three standard pockets provide ample space for all your ride essentials. - Full-length front zipper to manage ventilation easily. - Fabric content: MAIN: 86% Polyester, 14% Elastane - OTHER: 95% Polyester, 5% Spandex.

The Halo II - Pullover Headband is our best-selling sweatband featuring the patented SweatSeal® with grip technology. Great for cycling, running, tennis, soccer, or virtually any other activity that will work up a sweat. Comfortably fits under helmets. - The pullover design is very comfortable - Patented SweatSeal® forms a water-tight seal that channels sweat back and away from the eyes and face! - Grip Technology keeps it in place during any activity - Antimicrobial Dryline® fabric absorbs sweat, wicks moisture, and dries quickly - A wide unisex headband that will not lose shape, form, or stretch out - Works great under helmets - The headband is 2" wide in front and tapers back for good ear clearance - Hand wash or machine wash cold, hang dry - One size fits most - Made in the USA - One-year warranty against manufacturer defects

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world’s best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It’s 1% faster than any shoe we’ve ever made, and at the finish line, that’s all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features—Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

Pasela is Panaracer's standard all around touring or urban commuting tire. Its comprehensive size range ensures that you can find a Pasela for most any usage. Ride it and trust it. - Steel (Wire) bead

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Take a step back in time with us as we cruise the sun-drenched South of France with Peter Sagan. The new Sagan Collection—Disruption—brings to life the fearless racing style of the ‘70s rouleurs with Peter Sagan's larger-than-life personality at its heart. It's the ultimate expression of this disruptive rider and his stylish ways—unmistakable and unmistakably Peter. Whether you need to wipe away sweat after a sprint finish or hide your face from your adoring fans, the Sagan Collection Bandana should do the trick. The Slovakian flag colors are the backdrop for this stylish addition to your kit. - VaporRize™ lightweight, soft mesh fabric tackles moisture management, while remaining soft against the skin. - Fabric Content: 85% Recycled Polyester, 15% Elastane - Unisex sizing.

The Men’s ADV Garmet Washed Short Sleeve Jersey offers a casual cut, pull-over fit, two rear zipper pockets, and moisture-regulating, antimicrobial drirelease Merino. Making it an ideal choice for long gravel-filled days followed by good times at the cafe. - drirelease Merino with FreshGuard naturally cools, neutralizes odor, and wicks away moisture to keep you dry. - Unique Jersey fit with no front zipper, providing the perfect piece for transitioning off the Gravel into the café. - Two rear zipper pockets provide secure storage for small items. - Bottom hem elastic keeps the jersey fit close to the body, even when it's worn over your RBX Adventure Bibs with - SWAT Pockets. - UPF 30+ rating protects your skin from harmful ultraviolet rays. - Regular Fit is generous, so it fits close to the body without being constricting. - Fabric Content: Knit 84% Polyester, 11% Wool, 5% Spandex

- The Lift has a similar overall width to the wider Trailmaster series however its sitting platform is effectively longer front to back. - This paired with a larger centre relief channel helps disperse pressure while reducing contact where appropriate. - Popular with men and women alike. - Manufactured using a new vacuum moulded process, which gives a supple surface and a clean edge finish with a glimpse of the colourful underlighting.

A lock-on grip with a unique finned texture for added comfort and control. Get a grip on sustainability The XR Trail Comp grip features a unique finned texture that conforms to your hand to keep you comfortable all day while you ride. Plus, a lightweight nylon CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. You and your hands will both feel good knowing that the grip's core is made from recycled ocean-bound plastics. Product details - Finned texture pattern conforms to your hand for supportive grip - Rubber compound and tread design are optimized for control and comfort - Grip core made with recycled ocean-bound plastic - Single-clamp design maximizes grip surface for secure, predictable performance - Nylon CoreLock clamp offers dual clamp strength - 3mm M4 bolt increases hold and resists stripping - 31mm diameter

Stormchaser is Salsa's gravel bike for any and all conditions. Ample tire clearance and the single speed-compatible Alternator Flat Mount dropout system will see you through the muddiest rides. Equipped with a suspension fork and dropper post, the Stormchaser GRX 810 1x SUS lets you get rowdy with your route choices.

- Same light alloy body found on the Sylvan Touring, but with more teeth on the cage for added grip

The legendary Vivid is like a “Trail Whisperer.” Even in the most impossible situations, RockShox's most rugged coil shock always knows just the right way to get it done. Any trail, any time. Nothing shakes the Vivid’s confidence. From downhill racing to extreme freeride, the Vivid combines extreme durability with the precise adjustments that matter when you’re going big. Laser-etched controls let you dial in beginning and ending-stroke rebound as well as low-speed compression, making this shock fly through rock gardens as smoothly as it absorbs a sudden drop in altitude. - WEIGHT: 468g - DAMPING: External beginning stroke rebound, ending stroke rebound, low speed compression - CONFIGURATIONS: 200x57mm, 216x63mm, 222x70mm, 240x76mm, 267x89mm - SPRING: Steel coil - SPRING ADJUST: Preload - SHAFT MATERIAL: 7075 aluminum - BODY MATERIAL: Forged aluminum - BODY FINISH: Hard anodized - OTHER: *Weight based on 222x70, no coil, no hardware

The Fusion Drive Pro 600+ Front is a budget-friendly, feature-packed cycling light designed to elevate your riding experience. It provides powerful and long-lasting illumination with a maximum output of 600 lumens and a runtime of up to 36 hours. This light offers six output modes, including highly disruptive Daytime Flash ensuring maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime. The CNC-machined aluminum construction with cooling fins guarantees durability and efficient heat dissipation, the fresh optical design enhances light dispersion, and the optional GoPro mount allows for versatile mounting options. With waterproof USB-C charging(cable not included), compatibility with the Infinite Light Power Pack+, and rigorous IPX7 waterproofing testing, this light is ready to accompany you on any adventure. - Max 600 lumens / 36-hour max runtime - Max 600 lumens / 36-hour max runtime - Waterproof USB-C charging port with charge indicator - Daytime Flash mode with Highly Disruptive Pattern - CNC-machined aluminum construction with cooling fins - Engineered Optical Design - GoPro mount available separately - Infinite Light Power Pack+ Compatible for extended run times - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity

- Integrated front extension provides additional hand positions - Designed and intended for all types of drop bar riding - Traditional drop bar shape with no flair to the drops - Lightweight 6061-T6 alloy construction - 439g (42cm)

Aethos: Billions of calculations in the pursuit of one thing, the perfect ride. It's more than just a motto, it's a philosophy. The Aethos has been designed to straddle the line between a perfected ride quality, extreme lightweight, and undeniable style, and this Expert model is no exception. With quick-shifting, low-maintenance Ultegra Di2 electronic shifting and hydraulic disc brakes paired with bomb-proof Roval C38 Disc carbon wheels, you have the perfect steed to get you out on the road. - A featherweight frame is useless without confidence-inspiring ride characteristics, which is why we've developed the Aethos to have the perfect balance of front and rear stiffness combined with exceptional ride quality. By studying the flexing and breathing of carbon fiber, we were able to discover groundbreaking findings about how forces flow through frames. Just a few pedal strokes and you'll realize this sublime ride sets a new standard. - Every detail, from the derailleur hangers to the fork expander plug have been designed with style, weight, and durability in mind. We've also spec'd it with Roval's all-new Alpinist carbon seatpost, further saving weight and improving ride characteristics. Everything in pursuit for the perfect ride. - The Aethos frame has been designed with the perfect combination of ultimate ride feel, light weight, and style, from accelerating up steep pitches and descending technical descents, to all-day saddle comfort on even the longest coffee rides, the Aethos hits the mark. But how, you ask? By reinventing the traditional road shape found on bikes of the past, we've subtly altered these shapes to deliver massive gains in stiffness and balance, all without affecting weight or durability. Pair that with an entirely new layup and process that we've perfected over multiple decades and you have the lightest frame out there (585 grams, S-Works, size 56cm). The Aethos is more than just a new bike, it's the first of a new breed.

Proven on the mountain bike World Cup circuit and now taking the same grip and versatility to gravel and cross. This Booster Pro features the same aggressive tread pattern and performance rubber compound as it's larger MTB brother letting you push the limits off the trails. Optimized for tubeless use, resulting in one of the fastest and lightest aggressive condition gravel/cross tires on the market. - New tread design: modern and aggressive look, optimized for fast rolling and excellent cornering traction. - Always prepared: The Booster is a great choice for all seasons. It's fast on hardpack, but also holds its own when it gets wet and slippery. - Tubeless ready

Aaron Ross' signature Boss v2 stem is a classic top-load, 6-bolt design. Along with other Odyssey v2 stems, the bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip - Special surface contouring and a larger bolt head spec for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)

We created the endurance road category two decades ago proving that high ergonomics means high performance. Today, the new Roubaix SL8 with Future Shock 3.0 is lighter, faster, and smoother than any road bike ever made, unleashing unmatched confidence. The road may be hell below, but on Roubaix, it's always heaven above. - COMPLIANCE: Future Shock 3.0 is the star of the show, more tunable, adjustable, and durable than ever. Now, regardless of position on the bike, every rider experiences 20mm of smooth, stiction-free travel between the stem and head tube. Future Shock helps keep your hands and bars steady for a smoother ride with more control to stay fast, safe, and confident. - Our dropped clamp design exposes more seatpost to increase deflection, but "more" isn't simply better. The Pave seatpost controls that deflection for the optimal vertical compliance. Together they create 'Cobble Gobbler' technology, and when paired with the Roubaix's rigid rear triangle, deliver a smooth ride with no loss in efficiency. - The Roubaix SL8 is the smoothest road bike our Ride Science Team has ever tested-reducing impacts at the bars and saddle by 53% vs. the nearest competition. With Roubaix's Future Shock 3.0 the wheel quickly moves over the bump, while rider mass remains stable, maintaining momentum in rough terrain. Typical forks deflect backward on impact, causing a measurable loss in speed. It's a scientific fact, smoother is indeed faster. - CAPABILITY: The Roubaix pioneered endurance geometry, so you ride "IN" the bike, not "ON" the bike to relieve pressure on your hands, arms, and shoulders for capability and confidence on any road, yet it's ready to dissect a mountain decent at full gas. Snuggle up. - With tire clearance up to 38c/40mm, this endurance road machine delivers better traction than ever on rough roads and even light gravel. Thanks to lightweight, super-efficient Specialized tires, that extra tire volume and traction comes with no downsides. - Roubaix inspires really BIG days on the bike, so we've given it every mount your adventures could need- three bottle mounts, top-tube mounts, and it's even fender-ready. So, go ahead and bring it all along for the ride. - PERFORMANCE: The new Roubaix SL8 is our most aero yet, with new aero shapes from our Free Foil library and dropped seat stays. At just 825 grams, the frame is 50 grams lighter, utilizing lessons learned from the Aethos—the world's lightest production frame—and our premium Fact 12r carbon blend. Nothing in its class is faster or lighter than the Roubaix.

- Crank Arm Length: 175mm - Interface: ISIS - Position: Left

A 25mm welded rim made for the demands of AM. Lightweight rims as wide as most downhill rims were just a couple of years ago? State-of-the-art materials and extensive testing make it possible. DT Swiss knows exactly how light it can design a product to fulfill its purpose to perfection. This is why the XM 421 is as light as an All Mountain rim can get, yet still fears no trail, no matter what rock gardens it has on the menu.