Other

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Wolf Tooth Headset Spacers for Trek Knock Block are machined in the USA out of aircraft grade aluminum. - Compatible with Trek Knock Block system - These spacers have unique raised features that key to Knock Block compatible stems (made by Bontrager) - 1 1/8" top (straight 1 1/8" or 1 1/8" to 1 1/2" taper) steerer tubes only

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Genuine replacement parts Get back on the road with a quality replacement hanger. Original equipment replacement rear derailleur hanger. - Original replacement rear derailleur hanger - For use with 2008-2010 Trek Madone

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For use with 135x5mm hubs Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: Thru axle nut

Genuine replacement parts Integrates seamlessly into the frame. Neutral matte black option only, paint match charge port covers may be available for select models, refer to spec sheet in Bike tech section of your bike SKU. Protects the charge port from the elements. - Durable plastic construction - Includes hardware - Not compatible with Bosch Smart System

Genuine replacement parts Revive your ride with these BB90/95 bottom bracket bearings. Replacement V2 bearings for oversized bottom brackets. - V2 Bearing to be used in BB90 or BB95 shell when bottom bracket bearing bore is slightly oversized - Measurable Outer Diameter (OD) of bearing is 37.1 x 21 x 8mm - Steel bearings - Oversize bearing for non-drive side of SRAM BB90 road cranks & SRAM BB95 MTB cranks

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 130mm Q/R - Mounting location: Rear drive side - Attachment: Thru axle nut

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 1-bolt

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Get back on the trail with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Trek Emonda SL/SLR Di2 Frame Hardware Kit from Trek. - For use with Emonda SL and SLR

Trek proprietary suspension hardware. - Refer to Service Manual for assembly instructions and service - Sold individually

This fine pair of Surly 10/12 Adapter Washers is designed to adapt any 135, 170, or 190mm O.L.D. QR axle hub with a 142, 177 or 197mm spaced thru-axle frame. Make sure the QR axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

- DT Swiss cartridge bearings - Sold in pairs

• Aluminum • CNC-finished

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

Add a rack to your frame, even if you don’t have rack mounts. Allows standard rack stays to be bolted directly to the seat collar, for a clean and simple look. Made from lightweight aluminum for durability, with threaded inserts to bolt the stays directly into the seat clamp. - 35mm inner diameter fits all alloy Specialized MTB frame designs with 30.9mm posts and 35mm O.D. seat tubes. - 37mm inner diameter fits all carbon Specialized MTB frame designs with 30.9mm posts and 37mm O.D. seat tubes.

QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool

- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack

- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack

Shimano Deore XT M8000 chainring bolts. - Color: Black - Material: Aluminum - Type: Torx

Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.

Shimano STI lever hoods. - Fits Ultegra ST-6700 levers only

Shimano Di2 STI lever hoods. - Fits Ultegra ST-6870 Di2 levers only

This is a replacement for the stabilizer unit of your Shimano rear derailleur, also commonly called a roller clutch assembly. A functional stabilizer keeps chains locked onto single ring setups, and reduces chainslap, mis-shifts, and ghost shifting. - Fits XTR RD-M9000, XT RD-M8000, SLX RD-M7000-11

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

RockShox Reverb Service Kit Includes O-Rings only